SOMFY Sonesse 30 RS485 Anleitung Seite 12

EN
LED colors
lights ON then lights OFF shortly. Bus communication. (It could be
Orange lights fixed ON
blinks 2 times.
Red lights fixed ON
lights ON then lights OFF.
blinks 2 times.
flashes in 3 sets of 3 blinks.
4.TIPS AND ADVICE ON OPERATION
4.1.Questions about the drive?
Observations
The motorised
product does not
work.
NOTICE
If the motorised product still does not work, contact a drive and home
automation professional.
5.TECHNICAL DATA
Power supply
Operating temperature
12
Feedbacks
Possible causes
The drive is in
thermal protection
mode.
©
Copyright 2022 SOMFY ACTIVITES SA. All rights reserved.
Possible causes
disable by SDN command).
Drive not set.
Push node ID to the SDN
network.
The drive has detected an
obstacle.
The crown does not turn.
Wait for the drive to cool down
to restart the drive.
Do not touch the drive: risk of
burns.
Drive position is out of limits.
Setting is impossible.
Solutions
Wait for the drive to cool down to
restart the drive.
Do not touch the drive: risk of burns.
24 V
0°C to 60°C
Sonesse 30 RS485