SOMFY Sonesse 30 RS485 Anleitung Seite 7

Sonesse 30 RS485
CAUTION
• Do not let the tube hanging by the head side only.
• Ensure that the drive-tube assembly is secured onto the end bracket. This
operation prevents the tube-drive assembly from coming out of the end
bracket attachment.
• Light gap reduced: Do not pinch cable or be careful they are not in contact
with moving parts.
2.1.6.Compatible power supplies (for US only)
For USA and CANADA, use only SOMFY power supply listed in the leaflet. For other
countries, see Compatibility Matrix document for appropriate power supply.
References
1870259
2.1.7.Wiring
2.1.7.1.Power wiring
CAUTION
• The product is intended for being supplied by Class II output of an external
power supply.
• Do not use an extension cord. If the power supply cord is too short, have a
qualified electrician install an outlet near the motorised product.
Connect the drive to the power supply:
▪ Black wire: -
▪ Red wire: +
PRECAUTION
• Cables routed through a metal wall must be protected and insulated by
sleeving or sheathing.
• Secure the cables to prevent any contact with moving parts.
• If the drive is used outdoors and if the power supply cable is of the H05-VVF
type, run the cable in a UV-resistant duct, e.g. trunking.
• The drive cable cannot be removed. If it is damaged, return the drive to the
After-Sales department.
©
Copyright 2022 SOMFY ACTIVITES SA. All rights reserved.
Designations
Somfy Power Panel
EN
7