Configuring Phone Numbers And Router Settings; Centro Business - Swisscom Centro Business 2.0 Einrichten

Configuring phone numbers and
router settings
> You can configure telephony and WLAN settings on the router directly or in our
Swisscom Customer Center at www.swisscom.ch/customercenter
> For maximum connection speed and stability, we recommend you to connect your
devices with an Ethernet cable, as WLAN transmits information at a lower speed.
> To configure settings on the router directly, connect your computer to the Centro
Business 2.0 using the Ethernet cable. After entering the URL http://192.168.1.1 in
your Internet browser, you can adjust your settings for the router and fixed
network telephony (IP).
> You can also find detailed instructions for configuring phone numbers and router
settings at www.swisscom.ch/centrobusiness under "Manage telephone settings".
Was the installation successful?
Test whether the installation was successful by checking the following steps:
> Are the Power and Internet LEDs lit up white?
> If you use fixed network telephony (IP): Is the telephony LED on the router white?
> For installed phones: Make a phone call.
> Are the websites in your browser displayed correctly?
> For installed TV: Switch on the TV and the setup box and check whether you receive
the channels you require.
Were all the tests successful? Then the installation is complete.
We hope you enjoy using your Centro Business 2.0 router.
Do you need help with the installation?
www.swisscom.ch/centrobusiness
Freephone number: 0800 055 055
26
Notes
27