OHAUS PX Serie Bedienungsanleitung Seite 9

6. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark Standard
This product complies with the applicable harmonized standards of EU Directives
2011/65/EU (RoHS), 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU (NAWI).
The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the applicable statutory standards of the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2012, UK Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety)
Regulations 2016 and Non-Automatic Weighing Instruments Regulations 2016. The UK
Declaration of Conformity is available online at www.ohaus.com/uk-declarations.
This product complies with the EU Directive 2012/19/EU (WEEE) and 2006/66/EC
(Batteries). Please dispose of this product in accordance with local regulations at the
collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
EN 61326-1
CAN/CSA-C22.2 No. 61010-1
UL Std. No. 61010-1
Important notice for PX/PXP/PJX/PR...M verified weighing instruments in the EU and UK
When the instrument is used in trade or a legally controlled application it must be set up, verified and
sealed in accordance with local weights and measures regulations. It is the responsibility of the
purchaser to ensure that all pertinent legal requirements are met.
Weighing Instruments verified at the place of manufacture bear the following supplementary metrology
marking on the descriptive plate.
Weighing Instruments to be verified in two stages have no supplementary metrology marking on the
descriptive plate. The second stage of conformity assessment must be carried out by the applicable
weights and measures authorities.
If national regulations limit the validity period of the verification, the user of the weighing instrument must
strictly observe the re-verification period and inform the weights and measures authorities.
As verification requirements vary by jurisdiction, the purchaser should contact their local weights and
measures office if they are not familiar with the requirements.
ISED Canada Compliance Statement:
This Class B digital apparatus complies with Canadian ICES-003.
ISO 9001 Registration
The management system governing the production of this product is ISO 9001 certified.
EN-7