Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
PTM-200 Thermometer
Item no: 2584006
1 Intended use
The product is a thermometer with a measuring probe. Use the product to measure and dis-
play the temperature of objects, liquids and gases between -200 to +200 °C.
Observe the following product limitations:
■
Do not use the product with corrosive substances.
■
Do not use the product with food.
■
Do not use the product for medical applications.
The front panel of the main unit is protected against water and dust ingress according to
IP65. Do not place the main unit in wet environments. Do not submerge the main unit in li-
quids.
The measuring probe is protected against water and dust ingress according to IP65. The
measuring probe is suitable for use in wet environments.
The product is designed for private and commercial use.
In commercial institutions, the accident prevention regulations of the Employer's Liability In-
surance Association for Electrical Systems and Operating Materials are to be observed.
The product can be used in schools and training centres. The use must be supervised by
trained personnel.
The product is intended for indoor use only. Do not use it outdoors.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Main unit with measuring probe
■
9 V block battery
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Live liquids and objects can cause life-threatening electric shock on contact. Disconnect
the power supply and check that liquids and objects are voltage-free before measuring.
■
Do not place the product under any mechanical stress.
4
■
Operating instructions
www.conrad.com/downloads
or scan the QR
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from direct sunlight.
5.4 Operation
■
Never use the product as a safety stop device to prevent personal injury or material dam-
age.
■
The measuring probe can become very hot or very cold and can cause serious skin
burns. Wear suitable protective gloves before touching the measuring probe.
■
Splashes of cold or hot liquids can cause skin burns. Wear suitable protective clothing.
■
Splashes of cold or hot liquids can cause eye injury. Wear suitable safety goggles to pro-
tect your eyes.
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 (Rechargeable) Battery
■
Correct polarity must be observed while inserting the (rechargeable) battery.
■
The (rechargeable) battery should be removed from the device if it is not used for a long
period of time to avoid damage through leaking. Leaking or damaged (rechargeable) bat-
teries might cause acid burns when in contact with skin, therefore use suitable protective
gloves to handle corrupted (rechargeable) batteries.
■
(Rechargeable) batteries must be kept out of reach of children. Do not leave (re-
chargeable) batteries lying around, as there is risk, that children or pets swallow them.
■
(Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge non-rechargeable batteries. There is a risk of explosion!
6 Product overview
2
3
4
5
6
1
Measurement probe
3
Display switch button MAX/MIN
5
Light control button
7
Indicator MAX
9
Temperature unit
11 Temperature reading
7 Installing battery
Note:
If an insulating strip protrudes from the battery compartment, batteries are installed
already. Pull the strip out to establish the power supply.
1. Loosen the screw that holds the battery compartment cover in place. Remove the battery
compartment cover.
2. Insert a 9V battery into the battery compartment and connect it to the connector in the
battery compartment.
3. Install the battery compartment cover and tighten the screw.
8 Operation
8.1 Switching on/off
1. Press the button ON/OFF to switch the main unit on.
à
If the battery status indicator shows a depleted battery, replace the battery.
à
The main unit switches off automatically after 10 minutes of inactivity.
2. Press the button ON/OFF to switch the main unit off.
1
7
8
9 10
11
2
Display
4
Power button ON/OFF
6
Battery compartment cover
8
Indicator MIN
10 Battery status indicator
Werbung
