Kessel Aqualift Comfort 400V Mono Einbau- Und Betriebsanleitung Seite 57

Level sensor Mono/Duo (non-ATEX)
Connect the cable ends of the level sensor to the terminals
(see "Fig. 3: Connecting the level sensor"). The connection
of level sensors is identical for both Mono and Duo systems.
Use KESSEL junction box (art. no. 28799) to lengthen the
connection cable of the level sensor.
Wire colour Name on PCB
red On/ON1
black On/On1
Use KESSEL connection box (art. no. 28799) to lengthen
the connection cable of the level sensor.
Fig. 3: Connecting the level sensor
010-532_02_SON
4.5.1.2 Connecting diaphragm pressure switches
Diaphragm pressure switches for Mono systems
Connect the cable ends of the diaphragm pressure switches
to the terminals (see "Fig. 4: Diaphragm pressure switch
Mono ").
Terminal colour
white
blue
Wire colour
yellow
green
brown
white
Installation and operating instructions
Fig. 4: Diaphragm pressure switch Mono
Name on PCB
Alarm
ON
Terminal colour
white
blue
white
blue
57 / 124