4.5.1.1 Connecting float switch without ATEX
Mono float switch
If float switches are to be used to determine the fill level,
check whether the system is a Mono or a Duo system and
connect accordingly.
Fig. 1: Float switches Mono
Connect the ends of the float switch cables to the terminals
(see "Fig. 1: Float switches Mono").
56 / 124
Several float switches (Duo)
Connect the ends of the float switch cables to the terminals
(see "Fig. 2: Float switches Duo").
Installation and operating instructions
Fig. 2: Float switches Duo
010-532_02_SON