EINHELL STE 3500 Bedienungsanleitung Seite 11

Anleitung STE 3500 SPK1
15. Troubleshooting
Cause
Fault
Automatic oil cut-out has not res-
Engine does not start
ponded
No fuel
Controller or capacitor defective
Generator has too little or no
Overcurrent circuit-breaker has
voltage
triggered
Air filter dirty
28.09.2005 15:08 Uhr Seite 11
Remedy
Check the oil level, top up with
engine oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter
GB
11