Impact Drill; Declaration Of Conformity - Bosch PSB 500 RE Originalbetriebsanleitung

OBJ_BUCH-862-009.book Page 14 Tuesday, April 14, 2015 10:34 AM
14 | English

Impact Drill

No-load speed
Rated speed
Impact rate
Rated torque
Torque at max. output power
Right/left rotation
Dust Extraction
Spindle collar dia.
Max. drilling dia.
– Concrete
– Steel
– Wood
– with extraction device mounted
Chuck clamping range
Weight according to EPTA-Procedure 01/2003
– with extraction device
– without extraction device
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Declaration of Conformity

We declare under our sole responsibility that the product
described under "Technical Data" is in conformity with all
relevant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments
and complies with the following standards: EN 60745-1,
EN 60745-2-1.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 14.04.2015
Assembly
 Before any work on the machine itself, pull the mains
plug.
Dust Extraction (PSB 500 RA) (see figures A–F)
 Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one's health. Touching or breathing-in the dusts can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
1 609 92A 18J | (14.4.15)
PSB 500 RE
-1
min 50 – 3000
-1
min 2400
-1
min 33000
Nm 1.1
Nm 7.5

–
mm 43
mm 10
mm 8
mm 25
mm 13
mm 2 – 13
kg –
kg 1.6
/II
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials
containing asbestos may only be worked by specialists.
– As far as possible, use a dust extraction system suitable
for the material.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the mate-
rials to be worked.
 Prevent dust accumulation at the workplace. Dusts can
easily ignite.
 Use the dust/chip extraction only when working con-
crete, brick and brickwork. Wood or plastic chips can
easily lead to clogging.
 WARNING Fire hazard! Do not work metallic materials
with the extraction device mounted. Hot metal chips can
ignite parts of the extraction device.
PSB 500 RA PSB 560 RE
50 – 3000 50 – 3000
2400 2400
33000 33000
1.1 1.1
7.5 7.5
 

–
43 43
10 10
8 8
25 25
13 13
2 – 13 2 – 13
1.8 –
– 1.6
/II /II
Bosch Power Tools