12. Select the SSID of the Wi-Fi network you want to connect the camera to, enter the network
key and save the configuration by pressing the
the Wi-Fi signal received by the camera is acceptable.
13. Disconnect the network cable from the camera to switch it to Wi-Fi mode.
14. If you want the camera to record and store video files on a micro SD card (not included),
plug the micro SD card into the slot when the camera is powered off. Power on the camera
and use the camera's webpage to format the card before starting the recording function.
If you are using a NVR/HVR device it is advisable to assign a static IP address to the camera.
"
Save
"
button. It is advisable to check that
23