urmet 1099/210 Schnellanleitung Seite 19

First select the device to change the IP address and then enter the new IP address, subnet
mask, gateway and username/password. Enter the device's password and press "Modify" to
change the device's IP address.
*NOTE:
Default IP camera parameters Static IP address: 192.168.1.168
Username: admin
Password: to be set during first login
Media port number: 9000
3. The camera is multi-browser and therefore only requires the installation of plug-ins when
using the Internet Explorer browser. Before using the Internet Explorer browser to access
the IP camera for the first time, you must install the relevant plug-in components as follows
• Access the IP address of the camera to install the plug-ins for the first time only.
On the web page that opens, select "download", then select "Execute" in the
message below.
• Wait for the plug-in to download, then confirm the installation of the ActiveX.
• Select 'Install' and wait for the installation to finish.
19