4.
When the Active X installation is complete, close the Internet Explorer web page and launch
it again by entering the IP address of the IP camera.
5.
Open the browser and enter the IP address of the camera (example: http://192.168.1.168)
and the window for creating the administrator password will be displayed. You must set the
password immediately to safeguard your privacy. The password must contain a combination
of 8 to 16 characters and meet the required security criteria. Make a note of the password
and keep it in a safe place.
6.
Confirm with the OK button. At this point, another window will appear where the user can
choose and configure how to recover the password in the event of its loss.
DS1099-157A
20