urmet 1099/210 Schnellanleitung Seite 17

2 Simplified EU declaration of conformity
Hereby, URMET S.p.A. declares that the radio equipment type: camera 1099/210 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: www.urmet.com
3 Installation
It is advisable to proceed as follows for correct camera installation and configuration:
1 Make sure that no units are powered before starting the installation procedure. It is advisable
to install and configure one camera at a time if you are installing multiple cameras on the same
network.
2 Connect the camera to the network.
3 Position the camera in a point on the wall or other surface and adjust the bracket to frame the
required scene.
4 If you want the camera to record and store video files on a micro SD card (not included), plug
the card into the slot when the camera is powered off (see the picture below). Power on the
camera and use the camera's webpage to format the card before starting the recording function.
5 If you are using a NVR/HVR device, assign a static IP address to the camera and use the
NVR/HVR menu to add the camera to a recording channel.
17