urmet 1099/210 Schnellanleitung Seite 15

ENGLISH
1 Warnings
Precautions
Make sure that the device is intact after removing it from the package.
Disconnect the device from the mains before cleaning or maintenance. Do not use spray products
to clean the device.
Check that the working temperature is within the indicated range and that the environment is
not particularly humid.
Disconnect power by means of the circuit breaker in the event of a failure and/or bad operation.
The device can only be opened by qualified technical personnel.
Exclusively contact an authorised service centre for repairs.
Installation specifications
Arrange a suitable circuit breaker and fuse upstream of the devices.
Make sure that the rating plate data correspond to the power specifications before connecting
the device to the mains.
Installation precautions
There are particular environments (such as seashores, harbours, wharves, etc.) that can
accelerate corrosion of external parts. Also installation in very dusty environments (quarries,
mines, dusty materials, etc.) can compromise the optimal operation.
To prevent device overheating, place it in a well aired position.
For the same reason, the device must not be installed near heat sources as radiators or warm
air ducts, in places where it is directly exposed to sun irradiation or in rooms with excessive dust
accumulation, subject to mechanical vibrations or impacts.
Consider the device operating temperature range before choosing the place for installation. Do
not install the unit over another heating device.
Do not power the device on immediately after moving it from a cold place to a warm one and
vice versa. As a general rule, wait for three hours: the device needs this time to adapt to a new
environment (temperature, humidity, etc.).
Video recording
This device is not designed as a burglar system but mainly to transmit and record video images.
URMET S.p.A. is not in any way responsible for loss or damages of the user consequent to theft.
Before using the device, record a demo video to verify the correct functionality of this feature.
URMET S.p.A. is not in any way responsible for loss of recorded data consequent to wrong setting
or usage, device misfunctioning or failure.
This device is composed by electronic precision components. Do not hit the device while
recording as it might affect the video.
Privacy and Copyright
The IP camera is designed for surveillance systems. Video recording is subject to the laws
applicable to the Country where used. It is forbidden to record images with Copyright.
The User is responsible to check and respect all local laws and norms for video signal recording.
The manufacturer is NOT in any way liable for any usage of the product which might result not
compliant to the relevant norms.
15