Berner 239839 Bedien- Und Wartungshandbuch Seite 30

ADJUSTMENT
Read at the top of the headlight the tilt
indicated by the manufacturer, e.g. 1.2%, and
turn the wheel on the bottom of the optical
chamber as needed.
If there is no indication by the manufacturer,
comply with the laws in force.
TEST OF THE LOW BEAM HEADLIGHT
Check the position of the low beam projection
on the control panel. It should be aligned with
the silkscreen printed line. Press the switch on
the side with low beam symbol and read the
value displayed.
TEST OF THE HIGH BEAM HEADLIGHT
Check the position of the beam projection on
the control panel. It should be aligned with
the silkscreen printed line. Press the switch on
the side with low beam symbol and read the
value displayed
HEADLIGHT TEST
14