Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ACCEPTANCE OF THE MACHINE
At the time of delivery it is essential to check at once and make sure you
have received all the material indicated in the shipping documents and
that the machine has not undergone damage during shipment. In this
case, show the damage to the forwarder and inform our customer service
department. Only if you proceed promptly in this way will it be possible to
obtain any missing material and reimbursement of the damage.
FOREWORD
This is a device designed for correct headlight beam alignment of any
motor vehicle.
The machine must be used for this purpose only. Even the finest of
machines can function properly and ensure profitable service only if used
correctly and kept in the best possible condition. For this reason, we ask
you to read this manual with care and to reread it whenever difficulties
should arise in using the machine. In case of need, we remind you that
our service centers, organized in cooperation with our retailers, are always
at your disposal for any advice you may need.
NOTE: the manufacturer may decide to make changes in the device
without notice, in order to adapt it to technological advances and specific
production or installation needs. Therefore, even if the illustrations shown
in the manual differ slightly from the machine in your possession, the
safety and instructions about it are guaranteed.
TECHNICAL DATA
Width
Lenght
Height
Weight
Power supply (if equipped with digital
display)
Light intensity reading range
Headlight inclination reading range
Headlight horizontal orientation
reading range
Packing dimensions
Packed product weight
mm
580
mm
712
mm
1710
kg
20
V DC
9
klux/1m
0-150
lux/25m
0-240
%
0 -4
cm/10m
+/-5
cm (WxLxH)
67x60x175
kg
25
4
Werbung
