Beurer MP 42 Gebrauchsanweisung Seite 24

Felt Cone
10
Suitable for smoothing and buffing nail tips after filing and for
cleaning the surface of the nails.
Position the manicure tool and move around the nail in a cons-
tant circular motion.
Sapphire Callus Rasp
11
For fast removal of stubborn calluses and hard skin on the soles
of feet and heels This attachment can be used on large areas.
Cylindrical Cutter
12
Suitable for smoothing rough and ridged toenail surfaces. Sim-
ply, place the cylindrical cutter horizontally on the nail surface
and removed the rough layer with slow circular movements.
Flame-Shape Cutter
13
Suitable for removing ingrowing nails.
Protective Nail Dust Cap
14
Captures nail dust as you file to minimise inhalation and clean up
time.
6. CLEANING AND MAINTENANCE
Before cleaning the power unit, always unplug it from the socket
outlet!
• Clean the instrument with a slightly moistened cloth. You can
also moisten the cloth with mild soap suds to remove more stub-
born dirt.
• If necessary, for reasons of hygiene, the attachments can be
cleaned with a cloth or brush moistened with alcohol. Dry them
carefully afterwards.
• Do not drop the instrument.
• Make sure that no water enters the instrument. But if this should
happen, do not use the instrument again until it is completely
dry.
24