Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATIONS
RECORDING
TAPES:
e
Refer to the operating instructions for your tape deck for
¢ While listening to playback on equipment connected to the
proper operating procedures.
rear panel terminals , you can record these same sounds on
NOTE:
tape merely by setting your tape deck to the recording
When the CD DIRECT switch is ON, the sound from the source
mode.
connected to the CD terminals will be output from the speaker
system, and the sound from the source selected by the FUNC-
TION switches will be recorded.
TO USE THE COMPONENT CONNECTED TO
THE ADAPTOR/TAPE 2 TERMINALS:
[For an adaptor component]
By connecting
a graphic
equalizer,
source
sounds
(from
NOTE:
records, tapes, AM/FM
broadcasts, etc.) can be heard with
When
the CD DIRECT switch is ON, the adaptor component
added sound and tone compensation.
cannot be used to modify the sound of the component connected to
Sounds compensated via the adaptor component can be
the CD terminals.
recorded.
3
ADAPTOR
ADAPTOR
[oor] CN]
.REC
PLAY
1 Play back the source.
3 Operate the adaptor component.
2 Set the ADAPTOR/TAPE
2 switch to ON.
9
<ARE1039>
Werbung
