Pioneer A-22 Bedienungsanleitung Seite 10

OPERATIONS
RECORDING
PLAY BACK
"ADAPTOR/TAPE 2
(our) Ci
@
R® ©
COR
RECORDING PLAYBACK
SIGNAL
1 Set the ADAPTOR/TAPE 2 switch to ON.
2 Operate the tape deck to perform playback (or
recording).
When two tape decks (or a double cassette deck) are used,
to another tape.
you can record the sounds from one deck onto the other.
Application examples:
¢ To make a tape copy with contents identical to the original
tape.
TAPE!
Qa ae PLAY BACK
= |
coor + REcORDING— =o
[When using two tape decks] e To copy from the tape deck connected to the ADAP-
1
Load tapes for playback (pre-recorded
tape)
TOR/TAPE 2 terminals to the deck connected to the TAPE
and recording (non-recorded tape) into the 1 terminals ..... Set to any function other than TAPE 1, and
respective tape decks.
set the ADAPTOR/TAPE 2 switch to ON.
Select the proper function switch.
3
Operate the tape decks to begin copying.
¢ To copy from the tape deck connected to TAPE 1 terminais
Set the tape deck with the original (playback) tape to the
to the deck connected to the ADAPTOR/TAPE 2 terminals playback mode, and set the tape deck with the non-
stats Press TAPE 1.
recorded tape to the recording mode.
10
+ 1