Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONNECTIONS
CD player
Tape deck
Tape deck or
adaptor component
(graphic equalizer)
CONNECTING
SPEAKER WIRES
1. Strip off the vinyl covering and twist the tip of the wire.
m=)
2. Raise the lever in the direction of the arrow and insert the
exposed conductor into the hole.
3. Now return the lever to its original position to secure the
cord.
NOTE:
Do not allow any of the cord's conductors to protrude from the ter-
minals
or
touch
any
other
conductors.
Malfunctioning
or
breakdowns may occur when conductors come into contact with
each other.
4
<ARE1039>
Tuner
Speaker
system A (R)
Speaker
system A (L)
AC wall socket
Illustration not
LO o™
applicable to
U.K. model.
(e)
Speaker
system B (L)
fo ™\
Speaker
system B (R)
CONNECTING
INPUT/OUTPUT CORDS
Connect the white plug to the L (left) side, and the red plug to
the R (right) side. Be sure to push the plugs in securely.
L side @.
R side @.
Red plug
Speaker Impedance
When
speaker systems are connected
to only one of the
SPEAKERS A, B terminals, such speakers should have rated
impedance in the range of 4 ~ 16 Q.
White plug
Werbung
