Pioneer A-22 Bedienungsanleitung Seite 5

PANEL FACILITIES
FRONT PANEL indications on the actual unit may differ from those in the illustration.
However, operating procedures are the same.
BASS tone control
Use to adjust the low-frequency tone. The center position is the
flat (normal) position. When moved to the right, low-frequency
tones are emphasized; when moved to the left, low-frequency
tones are de-emphasized.
NOTE:
This function does not operate when the CD DIRECT switch is
in the ON position.
PHONES jack
When using headphones, insert their plug into this jack.
TREBLE tone control
Use to adjust the high-frequency tone.
The center position is the flat (normal) position. When moved to
the right, high-frequency tones are emphasized; when moved to
POWER switch
Press to turn power to the unit ON and OFF.
the left, high-frequency tones are de-emphasized.
| NOTE:
This function does not operate when the CD DIRECT switch is
in the ON position. p I
NEE
STEREO AM wut Ae
ces. manta
res
a hy ee z
MASTER VOCLINE
ors ye ey wax
BALANCE control
Should normally be left in the center position. Adjust balance if the
sound is louder from one of the speakers. If the right side is louder,
move toward the LEFT position and if the left side is louder, move
toward the RIGHT position.
NOTE:
This function does not operate when the CD DIRECT switch is
in the ON position.
SPEAKERS A selector switch |
Use this switch to listen to the speaker systems connected to the
SPEAKERS A terminals.
SPEAKERS 6 selector switch
Use this switch to listen to the speaker systems connected to the
When the speaker system is connected to only one speaker terminal
systems. . . (A or B) and both A and B selector switches are ON, there will be no
[OFF] — Released position: No sound is heard from the speaker sound. Turn ON only the selector to which the speaker system is con-
systems. Set to this position when listening with headphones. .
nected.
—t
5
<ARE1039>
|
|
| :
|