Quick Tools QU969A+ Bedienungsanleitung Seite 18

2.4.2 Connection
1. Connect the 5-pin plug into station, and make sure the pin in
the plug must match the groove in the connection socket. Place
the soldering iron handle in the iron holder.
2. Insert the power plug into grounded power socket.
3. Turn on the power switch.
NOTE: Put the handle on the iron holder when the work is finished.
2.4.3 Temperature Setup
1. Set the temperature by revolving the temperature-controlling
knob.
2. When the temperature of the soldering tip rises to the set
temperature, the heating indicator will flash, indicating that
soldering can be carried out.
3. When the soldering tip is heating up at full power, the red light
is steady on. When cooling or malfunction, the red light does
not go on.
5
USER MANUAL