Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction
Basic Rules for safety
I. As well
as carefully following
instructionsit is important to adhereto all current
safety legislation!
Z. No one under sixteen years of age should operated
this
machine. New,
operatorsmustreceivethoroughtraining andnever
work
alone.
3. The machineoperatorshouldnot allow anyoneelse
within the working areaof the machine
4. No one should be near the discharge area of the
machine at any time when the machine is working.
5. Warning stickers are provided to ensure safe
operation. Do not ignore the advice given.
6, Operatorsmust wear suitable protective clothing,
which is close fitting, and be provided with eye and
ear protection. Special attention must be paid to
good fitting suitable gloves and correct safety
shoes.
7. All safety devices must be in operation throughout
the machine. Do not attempt to bypass them or
otherwise operate the machine when they are
defective.
8. Read the engine operators manual to ensure
satisfactory and safe engineperformance.
9. Do not run the petrol engine in enclosed spaces,
Always ensure there is adequate ventilation.
10.Fully
understand the correct function of the
machine before attempting to start.
I I Rotating
parts, particularly
will
continue
to
rotate
stopping the engine.
12.Be very careful when handling with fuel particular
do not re-fuel near naked flames, any possible
ignition source or when the engine is hot. Do not
smoke when re-fuelling.
13. Before re-fuelling
stop the engine and allow to
cool. It is always better to refuel the engine before
work whilst the engine is cold. Do not re-fuel in
enclosed areas and avoid fuel spillage by using
correct containers and funnels. In particular, keep
the machine clean to avoid the build up of
inflammable
dirt.
14.Operate only on solid, firm ground.
15. Never
leave
the
machine
engine running and always shut off the fuel tap
when not in use. Disconnect the main supply plug
on units
with
electric
motors.
16.With electric powered machines, always disconnect
the main supply by removing the plug before
working on the unit. With petrol engines, always
disconnect the sparking plug lead when working on
the machine.
17.The belt drive and safety switches must be correctly
attached, otherwise the safety switch will prevent
the machine from starting.
manual for Shredder
the safety
young or
inexperienced
the chapping motora
for
a short
time
after
unattended
with
the
4000 Profi
Warranty
As covered in our conditions of sale, we guarantee the
Shredder 4000Profi for a period of oneyear from purchase
datefor private use and six month for professional a nd
commercial
use. Warranty
Warranty RegistrationForm submittedfor any repairs.In
particularthis damagethrough misuseor operationwithout
safety features..
Description
The Shredder4000 Profi is equipped with a set of shredding
hammers and a shredding disk. Ihe shredding disk handles
branchesetcup to a maximum of 8cm diameter,as well as
twigs, leavesand other material which can be fed through
the main hopper.
Preparations
for work
Before using the machine, check that nothing has been left
in either of the two feed hoppers. In case of petrol engine
machines,check that the engine is full of fuel and oil (please
check engine manufacturers manual for details). For electric
powered units it is vital to check that the rotation dircction is
correct, if not have the correct wiring carried out by a
qualified electrician. I-n the case of three phase motors,
ensure that the cable has five
squaremm cable section and usea 16 A fuse.
Check the tensioning of the V-belt.
Technical
Data
Type
4000
380V
400V
Engine
37 kW
Protection
16A fuse
Cuttin
hammer
32
Clearin
hammer
4
Cutter
blades
1
Safe
switches
2
Cutting screen (optional)
A cutting screen can be used to ensure that dry
woody material will be very finely shreddered.
Please check with your supplier for technical
information.
6
is only
valid
if
enclosed
conductors
of at least 1.5
4000
electric
etrol-en
ine
Honda
GX
270
6 6 kW
32
4
1
2
Werbung
