Philips Respironics DreamWear Gebrauchsanweisung Seite 9

All manuals and user guides at all-guides.com
Note: Do not use the drying cycle on the dishwasher.
3. Air dry. Make sure the mask is dry before use.
Caution: Do not use bleach, alcohol, cleaning solutions containing bleach or
alcohol, or cleaning solutions containing conditioners or moisturizers.
6 Assembly and Disassembly
Assembly
Tip: Align the triangles on the cushion and
frame for proper assembly.
1. Cushion: Press into the mask frame until the
cushion clicks into place. jk
Note: The end of the cushion and the
opening in the mask frame are 'D' shaped.
The cushion end should match the frame.
2. Elbow: Insert into the top of the mask frame.
3. Tubing quick release: Push the tubing quick
release onto the elbow until it clicks into
place.
4. Fabric sleeves: Wrap the sleeves around the
mask frame and press the strips together.
Note: The sleeve seams should be on the
outside of the frame.
5. Headgear: Slide the tabs into the slots on the
mask frame and fold backwards.
Note: The Philips Respironics logo will be on
the outside and facing up when correctly
assembled.
Disassembly
1. Headgear: Undo the headgear tabs and pull
through the slots in the mask frame.
2. Fabric sleeves: Undo the strips and remove from the mask frame.
3. Tubing quick release: Pull the tubing quick release from the elbow.
4. Elbow: Pull the elbow from the top of the frame.
5. Cushion: Pull the cushion from the mask frame.
10
11
7
M
M