Declaration Of Conformity - Samoa UP05 ATEX Montageanleitung

EN

DECLARATION OF CONFORMITY

According to EC directive 2014/34/UE
SAMOA Industrial S.A.
Declares that the following products meet all requirements set forth in
EC directives 2006/42/CE and 2014/34/UE.
If the product is modified without our written permission, or if the
safety instructions in this manual are not followed,
this declaration will become invalid.
Notified body:
(1063) Laboratorio Oficial José María de Madariaga (LOM)
C/Eric Kandel, 1 (Tecnogetafe), 28906, Getafe, Madrid (Spain)
Tech. Doc. Ref.: LOM 22.409N-C X
The norms used for conformity of this product with safety and health
requirements applicable are:
UNE-EN ISO 80079-36
UNE-EN ISO 80079-37
IEC 60079-0
IEC 60079-10
UNE-EN 1127-1
UNE-EN ISO 12100
UNE-EN 809:1999+A1
Marking: the marking includes the Ex symbol and the technical
file reference.
Special instructions for safe use are specified in this manual.
4
855 879 R. 02/23
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
Product families (the X letter is used for variable positions):
55XXXX
55XXXX.XXX
UP03-XXX-XXX
UP05-XXX-XXX
UP10-XXX-XXX
UP15-XXX-XXX
For SAMOA INDUSTRIAL, S.A.
Pedro E. Prallong Álvarez
Production Director