STIEBEL ELTRON MAZ Bedienung Und Installation Seite 24

INSTALLATION
Water connection
6.2 MAW
6
1 Union nut of the threaded fitting
2 Ring insert
3 Seal ring
4 Tap body
5 Spout
6 Wall bezel
f Seal the thread of the tap body using hemp or Teflon tape.
f Fit the tap body together with wall bezel to the cold water
pipe. Align the tap body horizontally when doing so.
f Screw the spout with O-ring onto the tap body until
finger-tight.
24 | MAZ | MAW
7.
MAZ
1
2
3
4
5
f Connect the short black-marked connection hose "A" to the
angle valve in the cold water line.
f Using a spanner to hold the connection on the hot water
generator securely, connect the long blue-marked connec-
tion hose "B" to the cold water connection on the hot water
generator.
Water connection
Note
Ensure that the connection hoses are not kinked, twisted,
interchanged or put under tension during the assembly
process.
www.stiebel-eltron.com