Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Smoke
bahn)
- 31400
DR
Passenger
Car,
This model has a smoke genera-
Green, 901-203
tor
- 40390 „Facultativ"
Combine
supply of LGB Smoke and Clea-
- 46353 DR Boxcar, Platform
ning Fluid is also included with
For more
information
on the com-
this model. For best operation, fill
the generator halfway with fluid. If
plete LGB program, see the LGB
the generator is overfilled, it will
catalog.
not convert
Attention!
and Cleaning
OPERATION
smoke
Operating
Modes
may damage
This
model
has a three-way
Attention!
power control
switch
mounted
ting element in the center of the
inside the cab (Fig. la,b):
smoke generator.
Position 0: All power off
Power Supply
Position I: Power to lights and
Attention!
smoke generator
lity, operate this model with LGB
Position 2: Power to lights, smoke
power
generator
and
motors
(factory
power packs and controls) only.
pre-set)
The use of non-LGB power sup-
Multi-Train System
plies may void your warranty.
This model has a "D" gearbox and
For
decoder interface. It can be equip-
power supplies for indoor, outdoor
ped
with
an
LGB Multi-Train
and multi-train operation, see the
System Decoder (55020) using a
LGB catalog.
Decoder Interface Cable (55026).
Attention!
For
more
information,
contact
tion, this model may leave a small
your authorized LGB retailer or an
amount
LGB service station (see Factory
track. This dust can stain carpet
Service). We recommend factory
and
installation
of decoders.
assumes full responsibility for any
Hint:
If you install the decoder
damage.
yourself, reset the DIP-switches
on
the
circuit
board
inside
the
model. For Multi-Train
System
MAINTENANCE
operation ,
all
DIP-switches
Attention!
should
be set to OFF.
void your warranty. For factory
Lighting
authorized
This
model
has
automatic
direc-
authorized
tional
lanterns
on
the
front
and
product to an LGB service station
the
rear
of
the
loco.
The
cab
is
(see Factory Service).
also illuminated.
A voltage
stabi-
Lubrication
lization circuit reduces changes in
The
the brightness of the lights.
lubricated
This model has a "flat" multi-pur-
small
pose socket, with a removable
ce Oil (50019).
cover, on the rear of the cab (Fig.
Cleaning
2). This socket
can
be used to
This model can be cleaned using
provide track power to cars with
a mild detergent and gentle stre-
lighting or sound electronics.
am of water.
To
remove
the
cover
of
the
model.
socket, pull it straight out. If the
Replacing the light bulbs
cover is tight, gently use a small
Lower
straight screwdriver, to pry it out.
lantern housing away from the
(Do not pull out the rectangular
model. Remove and replace the
outer housing.)
bulb. Reassemble.
If your
cars
have
the older,
"round" lighting connectors, use
Upper front lantern:
the Light Socket Adapter (68334).
smokebox
8
Generator
in
the
smokestack.
A
small
the fluid into smoke.
Only use LGB Smoke
Fluid (50010) in the
generator.
Other fluids
your locomotive.
Never
touch
the
hea-
It is fragile.
For safety and reliabi-
supplies
(transformers,
more
information
on
LGB
After extended opera-
of carbon
dust
around
the
other
materials.
The
user
Improper service may
service,
contact
an
retailer
or
send
this
drive
rod
ends
should
be
occasionally
with
a
amount
of LGB
Maintenan-
Do not immerse
this
front
lanterns:
Pull
the
Open the
door.
Pull
the
lantern
Werbung
