Werbung
Frequency bands
This type of searching scans the frequencies used by most cable providers. This setting is the default.
1. With the Navigation-Buttons ( ▲▼) choose the option "Used service scan type".
2. With the Navigation-Buttons (◄►) choose the option "Frequency bands".
3. Press the OK-Button to save this settings.
Frequecy steps
This type of searching scans the set frequencies step by step in a set increment.
1. With the Navigation-Buttons ( ▲▼) choose the option "Used service scan type".
2. With the Navigation-Buttons (◄►) choose the option "Frequency Steps".
3. With the Navigation-Buttons ( ▲▼) choose the option "Frequency scan step size (kHz)".
4. Use the Numeric-Keypad to set the step increment.
5. Press the OK-Button to save this settings.
6.3 DVB-T Tuner-configuration
Follow these steps:
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ▲▼) choose the option "Setup" and press the OK-Button.
With the Navigation-Buttons ( ▲▼) choose the option "Services and Recordings" and press the OK-Button
3.
DVB-T Tuner-configuration
4 5
.
Werbung
