12. Press the Navigation-Button ( ►).
13. With the Navigation-Buttons ( ▲▼) choose the option "DiSEqC-Modus".
14. With the Navigation-Buttons (◄►) choose the option "1.2".
15. With the Navigation-Buttons ( ▲▼) choose the option "Use usals for this sat".
16. With the Navigation-Buttons (◄►) choose the option "No".
17. With the Navigation-Buttons ( ▲▼) choose the option "Stored position".
18. Enter position of the selected satellite which is saved in the positioner by using the Numeric Keypad.
Refer to the instruction manual of your positioner for the number of the saved position.
19. Press the OK-Button to save this settings.
6.2 DVB-C Tuner-configuration
Follow these steps:
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ▲▼) choose the option "Setup" and press the OK-Button.
3. With the Navigation-Buttons ( ▲▼) choose the option "Services and Recordings" and press the OK-Button.
4. With the Navigation-Buttons ( ▲▼) choose the option "Service Searching" and press the OK-Button.
5. With the Navigation-Buttons ( ▲▼) choose the option "Tuner configuration" and press the OK-Button.
6. With the Navigation-Buttons ( ▲▼) choose the "DVB-C Tuner" and press the OK-Button.
DVB-C Tuner-configuration
4 4