Werbung
This menu is meant for a Stab positioner. You only have to enter the geographical details of your residence.
At
http://www.heavens-above.com
The rest is done automatically by your Dreambox with build-in USALS. USALS is a model for calculating
the position of all satellites in orbit with a margin of error less than 0.1 degrees. USALS was developed by
the Stab company. Everything is done automatically and does not require any technical know-how.
Follow this steps:
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ▲▼) choose the option "Setup" and pressthe OK-Button.
3. With the Navigation-Buttons ( ▲▼) choose the option "Services and Recordings" and press the
OK-Button.
4. With the Navigation-Buttons ( ▲▼) choose the option "Service Searching" and press theOK-
Button.
5. With the Navigation-Buttons ( ▲▼) choose the option "Tuner configuration" and press theOK-
Button.
6. With the Navigation-Buttons ( ▲▼) choose the option "DVB-S2 Tuner" and press theOK-Button.
7. With the Navigation-Buttons ( ▲▼) choose the option "Mode".
8. With the Navigation-Buttons (◄►) choose the option "Rotor".
9. With the Navigation-Buttons ( ▲▼) choose the option "Longitude".
10. Use the Numbers 0-9 to enter the coordinates of your residence.
11. With the Navigation-Buttons ( ▲▼) choose the option "Latitude".
12. Use the Numbers 0-9 to enter the coordinates of your residence.
13. Press the OK-Button to save this settings.
Stab Positioner using USALS
you can find the coordinates of your residence.
4 2
Werbung
