Werbung
4.8 Common Interface
1. Press the Menu-Button to open the main OSD menu.
2. Withthe Navigation-Buttons
3. With the Navigation-Buttons
4. With the Navigation-Buttons
Reset
This options resets your CI-Module.This functionis need edif you are experiencing trouble with one of your
encrypted services.
Init
This option initializes an inserted Smartcard. It is recommended to insert the CI-Module with the
Smartcard already inserted.
No module found
No CI-Module is inserted in to the slot. If you have inserte done the name and firmware version will show.
Navigate to this option and press the OK-Button toget to the extended options of the inserted CI-Module.
The option strongly depend on the type of module inserted and there fore will not be explained in detail.
Refer to the user's manual of your CI-Module for additional information on this topic.
Can decrypt multiple services
You cansetifyour CI-Module can decrypt multiple services or not . Please note that not every CI Module
supports this feature. Check the instruction manual of your CI-Module for information about this feature.
The "Auto" option only works withs ocalled Alphacrypt Modules. The Exit-Button will quit this menu.
High bit rate support
You can setif your CI-Module can process high bitrates (30.000). Please note that not every CI Module
supports this feature. Check the instruction manual of your CI-Module for information about this feature.
( ▲▼)
chooset he option "Setup" and press the OK-Button.
( ▲▼)
choose the option "Devices" and press the OK-Button.
( ▲▼)
choose the option "Common-Interface" and press the OK-Button.
2 8
Werbung
