Werbung
6.1.6 Stab Positioner without USALS
Use this type of configuration if you want to receive many satellites without a Stab positioner from a Single
Universal LNB. The coax cable is directly connected from your Dreambox to the LNB.
Stab Positioner without USALS
Follow this steps:
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons ( ▲▼) choose the option "Setup" and press the OK-Button.
3. With the Navigation-Buttons ( ▲▼) choose the option "Services and Recordings" and press the OK-Button.
4. With the Navigation-Buttons ( ▲▼) choose the option "Service Searching" and press theOK-Button.
5. With the Navigation-Buttons ( ▲▼) choose the option "Tuner configuration" and press theOK-Button.
6. With the Navigation-Buttons ( ▲▼) choose the option "DVB-S2 Tuner" and press theOK-Button.
7. With the Navigation-Buttons ( ▲▼) choose the option "Configuration".
8. With the Navigation-Buttons (◄►) choose the option "Extended".
9. With the Navigation-Buttons ( ▲▼) choose the option "Satellite".
10. With the Navigation-Buttons (◄►) choose the desired Satellite.
11. With the Navigation-Buttons ( ▲▼) choose the option "LNB".
4 3
Werbung
