Klarstein TURBODRAFT Bedienungsanleitung Seite 89

EN
CLEANING AND CARE OF THE EXTRACTOR HOOD
If you use a damp cloth for
cleaning, make sure that
no water gets into the slits
of the extractor hood.
Regularly empty and
clean the water cup
attached to the bottom of
the extractor hood (see
arrow).
Take the grid, clean it
carefully and then put it
back.
Remove the filter holder
horizontally. Remove
the grease filter from the
holder and wash it in the
dishwasher or clean the
grease filter manually.
Dispose of the residual
water from the filter
holder in the sink.
89