Next Level Racing ELITE Serie Montageanleitung Seite 27

)
A
A) Align the mounting holes on the Centre Pole Bracket with holes on the Centre Pole Mounting Arm.
49
B) Bolt through and secure with an M8 Bolt, Washer and Nyloc Nut.
C) Bolt through and secure with 2 x M8 Ratchet Handles and Washers.
)
A
50
A) Align the threaded inserts and slots on the HOTAS Angle Bracket with the slots on the Centre Pole Bracket.
B) Bolt through and secure with an M8 Bolt, Washer and Flange Nut.
)
A
A) Bolt through and secure with M8 Shoulder Bolts.
51
B) Align the holes on the HOTAS plate with the threaded inserts on the HOTAS Angle Bracket. Bolt through and secure with M8
Countersunk Bolts.
)
C
B
)
B
)
B
27
Video Instruction: bit.ly/nlrbuild
PARTS:
)
• • 1 x Centre Pole Bracket
• • 1 x M8 60mm Bolt
• • 1 x M8 Nyloc Nut
• • 1 x M8 Washer
• • 2 x M8 (20mm) Washers
• • 2 x Ratchet Handles
PARTS:
• • 1 x Hotas Angle Bracket
• • 1 x M8 60mm Bolt
• • 1 x M8 Washer
• • 1 x M8 Flange Nut
PARTS:
• • 1 x Hotas Plate
• • 2 x M8 16mm Countersunk Bolts
• • 2 x M8 Shoulder Bolts