SOLIS 796 Kurzanleitung Seite 11

• Do not use a sharp object to remove residue on the pans or griddle. This
could damage the non-stick coating.
• Only use the appliance with the provided accessories or accessories
recommended by Solis. Incorrect accessories or misuse can lead to damage
to the appliance.
• Do not place spatulas or pans on the griddle. This could damage the spatulas
or pans.
• Do not leave empty pans in the heating area. This could damage the pans.
Place empty pans in the cooling area.
• Do not heat the fondue pot when it is empty. When not used, remove the pot
from the appliance or fill it with water (max. 1 liter).
Safety instructions regarding maintenance
WARNING
6
• Do not use the appliance if it is damaged or defective. Replace a damaged or
defective appliance immediately
• If the power cable is damaged, replace it with an original special cable or
assembly available from the manufacturer or its service agent.
• Switch off and disconnect the appliance from the power source before
cleaning.
• Let the appliance cool down before cleaning.
• Never immerse the appliance in water or place it in a dishwasher. Only the
griddle and the Fondue pot can be cleaned in a dishwasher.
• Do not use abrasive chemical cleaning agents such as ammonia, acid or
acetone when cleaning the appliance. This can damage the appliance.
CO N T E N T S
V
Please check the contents of the package:
1x COMBI GRILL 3 IN 1
1x Power cable
8x Pan
8x Fondue fork
8x Spatula
16
A P P L I A N C E D E S C R I P T I O N
V
Fondue pot
1
Griddle
2
Heating area
3
Grill
4
Base plate / cooling area
5
CO N T R O L B U T TO N S
V
Griddle temperature control
q
Power port
w
B E F O R E F I R S T U S E
V
1. Rinse the following parts with hot water:
– Fondue pot
1
– Griddle
2
– Upper side of the base plate
5
– Spatulas
8
– Pans
7
– Fondue forks
6
2. Install the appliance according to chapter Installation.
3. Fill the fondue pot with water (max. 1 liter).
When using the appliance for the first time, smoke can occur. This is normal, due to burnt
4
manufacturing residue.
4. Let the appliance heat up for 10 minutes.
5. Switch off and disconnect the appliance from the power source.
6. Let the appliance cool down.
I N S TA L L AT I O N
V
Place the base plate
1. on a stable, flat, heat and moisture resistant surface.
5
Place the grill on the baseplate 5.
2.
4
Place the griddle on the grill 4.
3.
2
When preparing for use with the griddle 2:
4. Lightly grease the griddle 2.
When preparing for use with pans 7:
5. Place the pans on the baseplate / cooling area 5.
7
When preparing for use with the fondue pot 1:
6. Fill the fondue pot with a maximum of 1 liter.
1
7. Place the fondue pot into the grill4 (image D).
1
Place the fondue forks into the fondue pot 1.
8.
6
To switch on the appliance:
Make sure both temperature controls
9.
q r
10. Plug the power cable into the power port w.
9
11. Plug the other end of the power cable
into a power outlet.
9
12. Switch the power switch
to I to switch on the appliance.
e
13. When preparing for use with the griddle
2
to the maximum position.
q
Fondue fork
6
Pan
7
Spatula
8
Power cable
9
Power switch
e
Fondue pot temperature control
r
are turned to 0.
or the pans 7, set the griddle temperature control
17