CleanSpace 2 Bedienungsanleitung Seite 14

9. Product Warranty
This product has been manufactured using quality parts and processes.
CleanSpace Technology Pty Ltd warrants that the product is free from defective workmanship and parts for a period
of two (2) year from the date of original purchase provided the product has been used, cleaned and maintained in
accordance with these instructions and CleanSpace Technology's recommendations. This warranty does not include
consumable parts, such as filters and face masks, which must be replaced regularly by the user. Consumable parts
are warranted up to the point of use, provided they have been stored correctly and are within their expiry date.
This warranty does not cover:

Where the product has been used for industrial purposes outside the recommendations of CleanSpace
Technology Pty Ltd;

Where damage has been caused by misuse, neglect, accident, or excessive wear and tear.
Any claim under this warranty must be made within two (2) year of the date of purchase of the product. All warranty
claims must be made by returning the defective product to your supplier together with the proof of purchase. The
purchaser is responsible for all freight. In the event that any part of the product is found by CleanSpace Technology
to be defective, CleanSpace Technology will either repair or at its discretion replace the faulty part.
This warranty is given by:
CleanSpace Technology Pty Ltd
(ABN 24 146 453 554),
Unit 5, 39 Herbert Street,
St Leonards NSW 2065 Australia
T. +612 8436 4000
E. sales@cleanspacetechnology.com
This warranty is provided in addition to other rights and remedies you have under law. You are entitled to
replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure.
Disclaimer:
Whilst CleanSpace Technology has made every effort to ensure that the details and information given in both our
printed and online publications are accurate at the time of issue, full technical specifications are not necessarily
included. Furthermore, CleanSpace Technology has a policy of continuous improvement and the right is reserved to
alter details and information as the need arises. Accordingly, the Customer should check any details and
information they wish to rely on with CleanSpace Technology at the time of purchase. CleanSpace Technology
cannot accept liability in respect of any errors or omissions herein contained or for any loss or damage malfunction
or consequential loss arising from reliance upon our publication.
The Customer will be responsible for any risk to health or safety from goods in the Customer's possession and/or
control. The Customer's attention is drawn to the fact that statutory regulations and recognised codes of practice
exist covering the use and handling of some goods (including safety products). The Customer must ensure that
persons who use the goods receive adequate training and safety literature.
©2023 CleanSpace Technology Pty Ltd. All rights reserved.
No page or part of this manual may be reproduced in any form without written permission of the copyright owner
shown above. CleanSpace Technology reserves the right to correct typographical errors. All information is correct at
the time of going to print.
Notified Body (CE): BSI (2797)
The Netherlands B.V. Say building,
John M. Keynesplein 9, 1066 EP Amsterdam
The Netherlands
(EU) 2016/425, Category III
EN12942:1998/A2:2008, Class TM3
cleanspacetechnology.com/eu2016-425/
S005-770 Rev 8, 6 th May 2023
Released on Change Note ECN2061
Approved Body (UKCA): BSI (0086)
Kitemark Court, Davy Avenue, Knowlhill,
Milton Keynes, MK5 8PP
(EU) 2016/425 as brought into UK Law and amended,
Category III
BS EN12942:1998/A2:2008, Class TM3
cleanspacetechnology.com/eu2016-425/
13
English