Packaging - ECOLAB D50 Betriebsanleitung

General
1.5

Packaging

The individual packing items are packed to reflect the expected transport conditions.
Only environmentally friendly materials were used for the packaging. The packaging is
designed to protect the individual components against shipping damage, corrosion and
other damage up to the point of assembly.
Therefore, do not destroy the packaging and only remove it immediately prior to assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal
Incorrect disposal of packaging materials can be a threat to the environment.
Packaging materials are valuable raw materials and can, in many cases, be
used again or be usefully processed and recycled.
– Observe the locally applicable disposal regulations.
– Dispose of the packaging materials in an environmentally friendly manner.
If necessary, ask a specialist company to dispose of them.
There may be handling instructions on the packages (e.g. on top, fragile,
protect from moisture, etc.). These must be complied with accordingly.
Symbols shown below are examples only.
Possible symbols on the packaging
Fragile
Keep this
product dry
Electronic
components
Stacking
IPPC symbol
MAN050418 Rev. 2-10.2023
The arrowheads mark the top of the package.
Top
They must always point upwards, otherwise the contents could be damaged.
Indicates packages with fragile or sensitive content.
Handle the package with care, do not drop or knock.
Protect packages from moisture and keep dry.
Electronic components contained in the package.
Cold
Protect packages from the cold (frost).
The package may be stacked with other similar packages until the specified
maximum number is reached. Pay attention to the exact stacking number.
International symbol: Handling status for wooden packaging
n DE: Country code (e.g. Germany)
n NW: Regional identification (e.g. NW for North Rhine Westphalia)
n 49XXX: Registration number of the wood suppliers
n HAT: Heat treatment
n MB: Methyl bromide (gas-treated)
n DB: Debarked
8