Herunterladen Diese Seite drucken

JB-Lighting Varyscan 3 Special 250MSD Bedienungsanleitung Seite 18

Vorschau ausblenden Andere Handbücher für Varyscan 3 Special 250MSD:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Varyscan 3 Special 250MSD
3. Operation
3.1 DIP switches
The DIP switches are located on the backside of the unit.
(See page 16 technical data)
The are used to define the different operation modes and
to enter start address.
3.2 Select 6 channel or 8 channel mode
The Varyscan can be opperated either in 6 channel or 8
channel mode depending on the lighting control console.
The main advantage of the 8 channel mode is that every
effect is assinged to a seperate channel. Programming
therefore is less complicated.
If your lighting control console is only able to control 6
channels per unit, you have to assign the Varyscan to
6 channel mode.
DMX-output of JB-lighting consoles:
JB-lighting DMX-Controller
JB-lighting ScanControl
JB-lighting LICON 1
3.3 DMX settings
Use DIP switch 1-9 to assign the Varyscan to its address or start channel.
The Varyscan requires either 6 or 8 DMX channes, depending on the
actual mode (see chapter 3.2)
When using the Varyscans in 6 channel mode each unit requires 6 DMX channels.
If the first fixture in line is addressed to starting channel no. 1 the second
unit has to be addressed to channel no. 7. Never occupy one channel twice!
The third Varyscan in line has to be addressed to channel no. 13 and so on.
Example for DMX setting to channel no. "7"
Using the binary system the figure 7 consists of the figures 1+2+3 = 7.
DIP switch one is assigned to figure 1. DIP switch two is assigned to figure 2. DIP
switch three is assigned to figure no. 4. DIP switch four is assigned to figure no.8.
DIP switch five is assigend to figure no. 16 and so on. Switch DIP switch 1,2
and 3 to "on" to assign the Varyscan to start channel no. 7. Leave the rest of
the DIP switches in an "off" position.
Assignment of the first 12 Varyscan in line (6 channel mode)
Varyscan No.
DMX address
JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein Tel. ++49-7304-9617-0
6 channel
6 and 8 channel
6 and 8 channel
1
2
3
4
1
7
13
19
ON
1 2 3 4 5 6 7 8 9 10
DIP switch 10
5
6
7
8
25
31
37
43
ON
1 2 3 4 5 6 7 8 9 10
6 channel
8 channel
ON
DIP
1 2 3 4 5 6 7 8 9 10
DIP switch 10
OFF
ON
1 2 3 4 5 6 7 8 9 10
9
10
11
49
55
61
DIP
DIP
ON
DIP
12
67
19

Werbung

loading

Diese Anleitung auch für:

Varyscan 3 special plus 250msd