Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Calibrate the temperature
If you have a thermometer inside the sauna that does not show the same temperature as that
which has been entered on the control panel, you can make a calibration (Offset). This means
that you adjust the control panel and the thermometer after the same scale. That the temperatures
differ is due to the fact that the warmth in the sauna is not exactly the same in all spaces.
Example:
Your thermometer inside the
sauna shows 84°C and your
control panel is set on 80°C. The
difference is thus + 4°C. By
setting OFFSET: T1 on – 4°C, the
control panel will show the right
temperature.
Activate Smartsauna
Smartsauna is a function that measures the temperature in the sauna and computes the length of
time the heater will take to heat the sauna to the temperature that is set on the control panel. The
function only works when it is activated and in conjunction with a time setting.
Example:
You have had a hard day at work
and wish to relax with a sauna
bath directly when you come
home. When you arrive home at
16:00, you want the sauna to be
ready for you. By activating the
function Smartsauna the control
panel computes when the heater
should start, in order to warm up
the sauna to the temperature you
have chosen on the control panel.
All manuals and user guides at all-guides.com
Control panel Digi II
Calibrate the temperature
Make sure that the control panel is in Off-
mode before you calibrate the temperature.
1. Push the button prog ok for
three seconds
2. Page to the menu 3 with the
button prog ok
3. Calibrate the temperature with
the arrow buttons
4. Approve the temperature with
the button prog ok
Activate Smartsauna
Make sure that the control panel is in Off-
mode before you activate Smartsauna.
1. Push the button prog ok for
three seconds
2. Page to the menu 4 with the
button prog ok
3. Chose Smartsauna ON with
the arrow buttons
4. Approve the activation with
the button prog ok
11
Werbung
