Set The Temperature; Set The Duration - Helo Digi II Produkthandbuch

2
Set the tempera-
ture
The temperature is the tempera-
ture that the heater produces in the
sauna, for example 80° C.
1. Push the button for
the temperature
The display shows:
TEMPERATURE:
70 O C
2.

Set the temperature

with the arrow buttons,
for example 80° C
3. Approve the tempera-
ture with the button
prog ok
The display shows:
18:30
01:30
4. Start the heater by
pushing prog ok for
three seconds.
Turn on the
lightning
1. Push the button for lighting
The display shows:
All manuals and user guides at all-guides.com
Control panel Digi II
80 C
O
8
3

Set the duration

Duration is the time that the heater
will operate. Maximum duration is
six hours.
1. Push the button for
start time
The display shows:
ON-TIME:
01:30
2. Enter duration with
the arrow buttons,
for example 30 minutes
3. Approve the duration
with the button
prog ok
The display shows:
18:30
01:30
4. Start the heater by
pushing prog ok for
three seconds.
Activate ventilation
1. Push the button for
ventilation
The display shows:
80 C
O