Cisco 8800 Serie Sicherheitshinweise Seite 8

Statement 341—Metal Contacts on the Battery
Warning Do not touch or bridge the metal contacts on the battery. Unintentional discharge of the batteries can cause serious
burns.
Statement 353—This Product Must be Connected
This product must be connected to a power-over-ethernet (PoE) IEEE802.3af compliant power source or an IEC60950
Warning
compliant limited power source.
Statement 355—Telephone Receivers Produce a Magnetic Field
Telephone receivers produce a magnetic field that can attract small magnetic objects such as pins and staples.
Warning
To avoid the possibility of injury, do not place the handset where such objects may be picked up.
Statement 361—VoIP and Emergency Calling Services do not
Function if Power Fails
Warning Voice over IP (VoIP) service and the emergency calling service do not function if power fails or is disrupted. After
power is restored, you might have to reset or reconfigure equipment to regain access to VoIP and the emergency
calling service. In the USA, this emergency number is 911. You need to be aware of the emergency number in your
country.
Statement 372—Wireless LAN Products (Japan)
All wireless LAN products in the 5.2/5.3GHz band cannot be used outdoors. Use the product only indoors.
Warning
Regulatory Compliance and Safety Information—Cisco IP Phone 8800 Series
4
Regulatory Compliance and Safety Information—Cisco IP Phone 8800 Series