Cisco 8800 Serie Sicherheitshinweise Seite 10

Statement 1019—Main Disconnecting Device
Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device.
Statement 1021—SELV Circuit
Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage
(TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports
both use RJ-45 connectors. Use caution when connecting cables.
Statement 1030—Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1040—Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1045—Short-circuit Protection
This product requires short-circuit (overcurrent) protection to be provided as part of the building installation. Install
Warning
only in accordance with national and local wiring regulations.
Regulatory Compliance and Safety Information—Cisco IP Phone 8800 Series
6
Regulatory Compliance and Safety Information—Cisco IP Phone 8800 Series