Moving The Treadmill - Rebel Active Rba-1002 Bedienungsanleitung

FOLDING UP THE TREADMILL
WARNING
• Do not connect the equipment to the power supply nor operate it when
it is folded up.
• The running surface must come to a complete stop before folding.
• Do not lean on the equipment when it is folded up and do not place
anything on top of it that may make the equipment unstable or fall down.
1. Set the ON/OFF switch to the
OFF position and unplug the
equipment.
2. Hold the frame firmly in the
location marked with A and
raise it until it locks in place.
EN
26
UNFOLDING THE TREADMILL
WARNING
Keep people and pets away from the treadmill when it is
unfolding.
1. Hold the frame in the location
marked with A, push it forward
and gently press the cylidner
(marked with B) with your foot
at the same time.
2. While pressing the cylinder
with your foot, pull the frame
toward yourself.
3. Step back and let the frame
lower to the floor.

MOVING THE TREADMILL

The treadmill is equipped with transportation wheels that facilitate moving it.
1. Fold the treadmill as described in the "Folding up the treadmill" section.
2. Stand facing the treadmill.
3. Hold the handrail with both hands and lean the treadmill towards you.
4. Move the treadmill to the desired location.
CONNECTION
1. Plug the treadmill to the grounded wall outlet.
2. Set the ON/OFF switch to the ON position.
27
EN