Werbung
Verfügbare Sprachen
Verfügbare Sprachen
21366 Distance Rod
»Ring Lock«
- Height adjustable connector for satellite systems
- Subwoofer and satellite box stay in place thanks to the patented »Ring Lock« system
- Plastic mandrels create low-resonance connections
- Comfortable and secure height adjustment using the locking pin
- Expanding mandrel ø 35-36,5 mm, Height: 1010 - 1490 mm, Weight: 2.9 kg
Thank you for choosing this product. The instructions provide directions to all of the
important set up and handling steps. We recommend you keep these instructions for
future reference.
SAFETY NOTES
a. Criteria for maximum load:
a.
- the proper installation setup consists of the following:
a. -
subwoofer, distance rod and satellite box may not fall
a. -
over at a 5° testing angle
a.
- max. 35 kg
b. Prior to use:
b.
- The floor must be load bearing and level
b.
- Check if the distance rod, loudspeakers and aids
b. -
(e.g. ladders) are in working order, in particular regarding:
b.
- completeness, size relationship and quality
b.
- In the case of heavy loads the use of additional technicians is
b. -
required. (we recommend 2 technicians that are physically fit)
c. Safety during operation:
c.
- be sure the weight on the rod is centered:
c. -
if the weight is not centered - this has a negative affect on stability
c.
- Keep unauthorized individuals away from the installation
c.
- Ensure that the clamp screw 14 and the locking pin 12
c. -
are clicked into place
c.
- Never loosen the clamp screw or locking pin without having some-
c. -
one hold the weight of the subwoofer, loudspeakers, or satellite boxes
c.
- Protect against lateral forces.
c. -
These increase the risk of the installation falling over and also
c. -
place undue strain on the subwoofer flange adapter.
c. -
Examples of lateral forces:
c. -
- wind, impact, uneven surface, pulling on the installation
d. After use:
d.
- first remove the satellite boxes,
d. -
then loosen the rod from the subwoofer
d.
- Careful and attentive handling is required:
d. -
the adjustment options can result in pinching or wedging your hand
SET UP INSTRUCTIONS
1 Remove the distance rod from the box and screw the clamp
1
screw into the clamping bracket
2 Then turn both mandrel locking rings so that they are facing
2
OPEN, to be able to set the system to the smallest diameter.
3 Place the expanding mandrel system in the mountingadapter
3
of the subwoofer ensuring a tight fit.
4 Turn the lower locking ring towards the right
4
(Direction CLOSE) until the mandrel fits tight
4
in the flange adapter.
TECHNICAL DATA / SPECIFICATIONS
Tubes: Steel, black powder coating
Locking Rings: aluminum
Material
Screws, locking pin: steel, galvanized, nickel plated
Mandrel elements, handles: PA
Load Capacity
max. 35 kg / 5°
H: 1010 - 1490 mm
Dimensions
Mandrel system: ø 35-36,5 mm - 100 mm
Box
1050 x 50 x 100 mm
Weight
2.9 kg
Carrying Case 21421 (for one or two rods)
Accessories
Flange Adapters (19580, 19654, 19656)
(optional)
Screw On Flange (24281)
Adapter Sleeve 21326: ø 38 mm (=US-Variant)
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21366-014-55 Rev.12 03-80-233-00 6/19
Werbung
