Progress PVX1581 Benutzerinformation Seite 25

Problem and alarm code
Rattling or knocking sounds from
the inside of the appliance.
The appliance trips the circuit-
beaker.
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
For alarm codes not described in the table,
contact an Authorised Service Centre.
WARNING!
We do not recommend using the
appliance until the problem has been
completely fixed. Unplug the appliance
and do not plug it in again until you are
certain that it operates correctly.
12.1 The product number code (PNC)
If you contact an Authorised Service Centre,
you need to provide the product number code
of your appliance.
12.2 The dishwashing and drying results are not satisfactory
Problem
Poor washing results.
Possible cause and solution
• The tableware is not properly arranged in the baskets. Refer to bas‐
ket loading leaflet.
• Make sure that the spray arms can rotate freely.
• The amperage is insufficient to supply simultaneously all the appli‐
ances in use. Check the socket amperage and the capacity of the
meter or turn off one of the appliances in use.
• Internal electrical fault of the appliance. Contact an Authorised Serv‐
ice Centre.
The PNC can be found on the rating plate on
the appliance door. You can also check the
PNC on the control panel.
Before checking the PNC, make sure the
appliance is in the programme selection.
1. Press and hold simultaneously Glass
care and AUTO for about 3 seconds.
The display shows the PNC of your
appliance.
2. To exit the PNC presentation, press and
hold simultaneously Glass care and
AUTO for about 3 seconds.
The appliance returns to the programme
selection.
Possible cause and solution
"Daily use"
• Refer to
loading leaflet.
• Use more intensive washing programme.
• Activate the Extra power option to improve the washing results of
a selected programme.
• Clean spray arm jets and filter. Refer to
ing"
.
"Hints and tips"
, and the basket
"Care and Clean‐
ENGLISH 25