Samsung HW-Q800A Bedienungsanleitung Seite 5

05 USING A WIRELESS
CONNECTION
Connecting via Bluetooth
Top of the Soundbar
OR
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can reconnect any
Samsung TV or mobile device that was connected
before.
• BT PAIRING : In this mode, you can connect a new
device to the Soundbar.
(Press the PAIR button on the Soundbar remote
control or press and hold the
on the top of the Soundbar for more than 5 seconds
while the Soundbar is in "BT" mode.)
NOTE
• If asked for a PIN code when connecting a Bluetooth
device, enter <0000>.
Connecting via Wi-Fi (Wireless
Network)
• To connect a Soundbar to a mobile device via a
wireless network (Wi-Fi), the SmartThings app is
required.
1. Connect your mobile device (smartphone, tablet, etc.)
to the Wi-Fi network the TV is connected to.
2. Install and launch the SmartThings app on your
mobile device (smartphone, tablet, etc.).
3. Follow the instructions in the app screen on the
mobile device to connect the Soundbar to your Wi-Fi
network.
4. Using Alexa, you can play music, listen to news, see
weather forecasts, and control home appliances.
To use Amazon Alexa, an Amazon account is required
to connect the Soundbar over the network.
Connecting To Apple AirPlay 2
• With Airplay 2, you can control your home's audio
system from your iPhone, iPad, HomePod, or Apple
TV.
• This Samsung Soundbar supports AirPlay 2 and
requires iOS 11.4 or later.
• This feature may not be available in some countries.
06 TROUBLESHOOTING
5 sec
Before seeking assistance, check the following.
BT PAIRING
Soundbar does not turn on
OR
• Check whether the power cord of the Soundbar is
Soundbar works erratically
• After removing the power cord, insert it again.
• Try again after initializing the product.
• If there is no signal, the Soundbar automatically
In case the remote control does not work
• Point the remote directly at the Soundbar.
• Replace the batteries with new ones.
The Soundbar does not output any sound
• The volume of the Soundbar is too low or muted.
(Mic On/Off) button
• When any external device (STB, Bluetooth device,
• For sound output of the TV, select Soundbar.
• Remove the cable from the Soundbar and then
The Subwoofer does not output any sound
• Check whether the LED on the rear of the
In case the TV is not connected via HDMI TO TV (eARC/
ARC)
• Check whether the HDMI cable is correctly
• Connection may not be possible due to the
• HDMI-CEC may not be activated on the TV. Turn on
ENG - 5
correctly inserted into the outlet.
turns off after a certain period of time. Turn on the
power.
Adjust the volume.
mobile device, etc.) is connected, adjust the volume
of the external device.
(Samsung TV: Home ( ) → Settings (
→ Sound Output → Select Soundbar)
reconnect it.
Subwoofer lights in blue. Reconnect it when the
blue LED blinks or the red LED lights.
connected to the ARC terminal.
connected external device (set-top box, game
console, etc.). Directly connect the Soundbar.
the CEC on the TV menu. (Samsung TV: Home (
→ Settings ( ) → General → External Device
Manager → Anynet+ (HDMI-CEC) ON)
) → Sound
)