Beurer MN9X Gebrauchsanweisung Seite 18

5. DEVICE DESCRIPTION
The related illustrations are on page 3.
1 Beard trimmer
2 comb attachments for the beard
2
trimmer (3-7/8-12 mm)
3 Hair clipper
4 comb attachments for the hair clipper
4
(3-12 mm)
5 Nose/ear hair trimmer
Precision trimmer
6
Body groomer
7
2-level precision adjustment: 0.8 and
8
1.2 mm
9 ON/OFF controller
LED display with battery status in %
10
and charge display
Connection socket
11
12
Hard case
13 USB charging cable
14 Cutting oil
15 Cleaning brush
6. INITIAL USE
You must fully charge the battery for 90
minutes before the first use. The operating
period of the device is approx. 90 minutes
when it is fully charged.
If the battery charge level is less than 20%,
the LED display will show
and flash.
1. Connect the USB charging cable
connection socket
(not included in delivery). To charge the
device, only use a protection class 2 mains
"Lo" for "Low"
10
to the
13
and a mains adapter
11
adapter (
with household appliances and whose
output corresponds to the safety extra-
low voltages of 5 V and max. 1 A.
2. Insert the mains adapter into a suitable
socket. The LED display
current battery status in % and the charge
display flashes.
3. The battery is fully charged once the
LED display
the charging symbol is permanently
illuminated. The device is now ready for
use.
7. USAGE
7.1 Beard trimmer
1. Place the beard trimmer
device from above until it clicks into place.
To remove the beard trimmer
upwards with your thumb.
2. If necessary, select one of the two comb
attachments
trimmer. Make sure that you hear and feel
the comb attachment click into place. We
recommend that you start with the comb
attachment with the longest cutting length
initially so you can then slowly work your
way up to your desired length.
102.60_100.57_MN4X_MN9X_2023-06-23_01_put-on-beard-attachment_BEU
3. To adjust the cutting
length, slide the
comb attachment
upwards
2
downwards.
4. To switch on the device, slide the ON/OFF
controller
will start to light up.
10
18
), which is approved for use
10
shows "100%" and
10
1
and place it on the beard
2
102.60_100.57_MN4X_MN9X_2023-06-23_01_remove-beard-attachment_BEU
or
upwards. The LED display
9
shows the
onto the
, press it
1