Device Description; Initial Use; Usage - Beurer HT 15 Gebrauchsanweisung

5. Device description

Protective cap

6. Initial use

Inserting the battery
1. Slide the battery compartment lid open.
2. Insert the battery included in delivery into the battery com-
partment as shown inside the battery compartment. When
inserting the battery, ensure that the correct polarity (+/-)
is observed.
3. Then slide the battery compartment lid closed until you hear and feel it click into place.

7. Usage

Only use the lice comb on dry hair. Before use, comb the hair to be treated with a normal comb
right to the tips until all tangles are removed.
1. Using your thumb and index finger, press on the notches on the side of the protective cap until it
is released. Pull the protective cap up and off.
2. Move the ON/OFF switch to "I". A high-pitched beep sounds, which indicates that the device is
switched on and ready for use.
3. Hold the lice comb at an angle of 45° to the scalp. Slowly move the lice comb from the roots to
the tips of the hair. Slowly comb through all of the hair carefully and completely.
4. As soon as a louse comes into contact with the metal teeth of the lice comb, the beep audibly
changes. If the high-pitched beep does not sound again, clean the metal teeth with the clean-
ing brush.
5. To end the application, move the ON/OFF switch to "0". The high-pitched beep is switched off.
6. Clean the lice comb after every use as described in the "Cleaning and maintenance" chapter.
NOTE
The lice comb removes hatched lice as well as unhatched nits (the eggs of the lice). Repeat
the application every day for two weeks so that the lice are completely eliminated.
In order to prevent lice returning, we recommend repeating the application once or twice a
week for a further month. This means that any remaining lice can be removed.
Metal teeth
ON/OFF switch
Battery compartment
15