Opening/Closing The Shade; Installing The Protective Cover - Extremis HOPPER SHADE Montageanleitung

CLOSING THE SHADE
1. Tilt the latches upwards.
3. Tilt the latches downwards and put the protective
cover over the shade to prevent it from blowing open.

INSTALLING THE PROTECTIVE COVER

1. Put the protective cover (13) over the fabric roller
tubes (2) and the upper parts of the poles (1).
2. Close the buckle under the fabric roller tubes fastening
this side of the protective cover.
1
2. Close the two sides of the shade using the strap.
CAUTION:
speed up when it reaches its tipping point. Keep a firm
grip on the leather strap and carefully guide the shade
1
into its closed position. Some strength is required to
hold the weight.
2
2
3. Put the rest of the protective cover (13) over the fabric
roller tubes and close the protective cover by means of
the zip under the fabric roller tubes and the round
tubes so that the straps are also inside the protective
cover.
When closing the shade, it will suddenly
english 15