Extremis HOPPER SHADE Montageanleitung Seite 11

6. Insert the poles (1) in the ground anchors (12). Caution! The cut-out at the top should be facing inwards and the
hook should be facing outwards. Position the pole (1) in the ground anchor (12) in such a way that you can put the
bolt (4) through the hole in the ground anchor and through the hole in the pole. Tighten the nut (5) on the bolt (4).
7. Proceed to STEP 4 of the
"combined with hopper"
assembly instructions on the
previous pages.
7a
7b
8
7b
9
om het doek niet vu
aangeraden om de h
english 11